Filter
Top Products
-STEP 8:
Attach LEG PEDESTAL (9) to ~hc BENCH FRAME
(7) using two 3/8 X I" BuTroN HEAD CAP
SCREWS (39) and m’o 318" LOCKWASHERS (42)
as shown in FIGURE 8.
(NOTE: Both button headt cap screws must be
tightened at the same time us~ag two allen
wrenches.)
FIGURE 8
3/8 X I" BTN HEAD4~
,3/8 X 1" BTN HD
FIGURE
STEP 9:
¯ SECURELY assemble two 3/8" SPRING PINS (47) to the PAD SLEEVES (6) as shown in FIGURE
¯
Assemble four ROLLER PADS (4) to the PAD SLEEVES (6) using four PLASTIC WASHERS (24) and four STARLOCK
COLLARS (49).
¯
Slide PAD SLEEVES (6) over LEG PEDESTAL (9) until the spring pin pops into the holes. See FIGUR.E
¯
SECURELY assemble two 3/8 X I" BU’ITON HEAD CAP SCREWS (39) and two 3/8" LOCK NUTS (44) to the last holes in
LEG PEDESTAL as showa in FIGURE 9.
¯
Insert two 3 X 2" END CAPS (30) into the ends of the LEG PEDESTAL (9) as shown in FIGURE
] 1/2 I 1/2 I
1/2
I
1/2 I 1/2
6
2 3
[ I I
0
1 I,,,
I,,,
8