Filter
Top Products
3/8 X 1" ~
/
/
!
FIGURE 14
STEP 14:
¯
Attach two 1 X 1" GLIDES. (29) to the LEFT & RIGHT PAD SUPPORTS (12) (13) approximately where., shown in FIGURE
¯
SECURELY assemble the CABLE (23) to the cam on the LEG PEDESTAL (9) using one 3/8 X 1" BOLT (38), one
WASHER (41), and one 3/8" LOCK NUT (44). See FIGURE
¯
Insert threaded end of CABLE (23) through slot of the BENCH FRAME (7) and around LEG CURL/EXTENSION (9) as
in FIGURE 14.
11