Filter
Top Products
3/8 X 2-3/’4"
FIGURE 6
STEP 6:
¯ SECURELY assemble BAC~K PAD (14) to the RIGHT & LEFT PAD SUPPORTS (12) (13) using four 3/8 X 2-3/4" BOLTS
and -four 3/8" WASHERS (,11) as shown in FIGURE
FIGURE 7~~
STEP 7:
Aseemble two ROLLER PADS (4) to the BENCH FRAME (7) using one 18-1/4" SHAFT (18), four PLASTIC WASHERS
and two STARLOCK COLLARS (49) as shown in FIGURE
Assemble one 1-1/4" RUBBER BUMPER (28) to the middle of the plate on the BENCH FRAME (7) as shown on ]~IGUtLE
Insert two 3/4" FLANGE E.EARZIqGS (55) into the bushing of the LEG PEDESTAL (9), then slide the 3/4" DIA TAPPED SHAFT
(51) into the 3/4" FLANGE! BEARINGS (55) as shownin FIGURE
7