Filter
Top Products
/
/
I
/
/
3/8 X 1"!
FIGURE 4
STEP 4:
¯
SECURELY assemble SEAT PAD (15) to HINGE TABS (45) using two 3/8 X 1" BOLTS (38) and two 3/8" WASHERS (41).
FIGURE 4.
¯
SECURELY assemble one. 1/2" SPRING PIN (46) to the BENCH FRAME (7) as shown in FIGURE
FIGURE 5
112 X 6" ~
STEP 5:
Assemble RIGHT (12) & LEI~I
"
(13) PAD SUP-
PORTS to the BENCH FtLA~.~IE (7) using one 1/2
6" BOLT (32), two 1/2" lZL.~a’qGE BEARINGS (50),
and one 1/2" LOCK NUT (43) as shown in FIGURE
5. (NOTE: Securely tightest, then back nut off 114
turn to allow the two parts to rotate freely.)
1/2 [
1/2
I
6