Filter
Top Products
STEP 2:
FIGURE 2
5
• SECURELY assemble one 3/8” SPRING PIN (48) to the WOLFF SLEEVE (3) as shown in FIGURE 2. (IMPORTANT! Tighten nut of
SPRING PIN completely.)
• Attach one U-PIN (50) to the WOLFF SLEEVE (3) using one 1/2” PAL NUT (24). Slide one 4” VINYL CAP (25) onto the U-PIN (50) as
shown in FIGURE 2.
• Pull back on SPRING PIN and CAREFULLY slide the assembled WOLFF SLEEVE (3) onto the PRESS FRAME (9) until the SPRING
PIN engages in one of the holes. See FIGURE 2.
48
50
3
24
25
9