Filter
Top Products
FIGURE 8
11
• SECURELY assemble one 1/2” SPRING PIN (47) to the PRESS ARM (4) as shown in FIGURE 8. (IMPORTANT! Tighten
spring pin completely.)
STEP 8:
29 1/2 X 7-1/2”
4
5
44 1/2” LOW HEIGHT
47
• SECURELY assemble the PRESS ARM (4) to the PRESS ARM ADJUST (5) using one 1/2 X 7-1/2” BOLT (29), two 1/2”
WASHERS (41), and one 1/2” LOW HEIGHT LOCK NUT (44). (NOTE: SECURELY tighten, then back nut off 1/4 turn to
allow the press arm to rotate freely.) See FIGURE 8.
• Pull back on 1/2” SPRING PIN (47) to adjust the PRESS ARM (4) position.
41
• SECURELY assemble four 3/8 X 2-3/4” BOLTS (37) and four 3/8” LOCK NUTS (45) to the PRESS ARM ADJUST (5) as shown in
FIGURE 9.
37 3/8 X 2-3/4”
45