Filter
Top Products
14
0
1
2
3 4 5
6
1/2 1/2 1/2 1/2 1/2 1/2
FIGURE 11
FIGURE 12
STEP 11:
• SECURELY assemble two 4-1/2” PULLEYS (19) to the TOWER BRACE (7) using two 3/8 X 2” BOLTS (38), and two 3/8”
LOCK NUTS (45). See FIGURE 11.
• Place TOWER BRACE (7) over the GUIDE RODS (20) and SECURELY assemble TOWER BRACE (7) to the TOWER (1) using
two 1/2 X 4” BOLTS (31), two 1/2” WASHERS (41), and two 1/2” LOCK NUTS (43) as shown in FIGURE 12.
STEP 12:
41
43
19
38 3/8 X 2”
45
7
7
31 1/2 X 4”
20
1
28
• Slide the 13/16” SHAFT COLLARS (28) to the top of the GUIDE RODS (20) and SECURELY tighten the set screws of the SHAFT
COLLARS (28) set screws. See FIGURE 12.