Filter
Top Products
FIGURE 14
16
STEP 14:
0
1
2
3 4 5
6
1/2 1/2 1/2 1/2 1/2 1/2
• Route the threaded end of the CABLE (21) through the large hole in the PRESS FRAME (9) as shown in FIGURE 14.
• Wrap the CABLE (21) around one 4-1/2” PULLEY (19) and SECURELY assemble the 4-1/2” PULLEY (19) to the vertical pulley bracket
on the PRESS FRAME (2) using two 3/8 X 2” BOLTS (38) and two 3/8” LOCK NUTS (45) as shown in FIGURE 14. (NOTE: Make sure
CABLE (21) runs over the retaining bolt on the vertical pulley bracket.)
38 3/8 X 2”
45
2
19
21
9