Filter
Top Products
Assembly
20
Note:The left and right grips are not interchangeable!
The hole in the left grip is smaller than the hole in the
right grip.
•Fit the left grip on the end of the left handlebar.
Hint: If it is difficult to slide the grip onto the handlebar,
moisten the inside of the grip with water.
40
Left Handlebar
Left Grip
• Slide the remaining front/rear axle through the left shock,
the large wheel and out through the right shock.
• Fit a .437 cap nut onto the end of the front/rear axle.
•Tap the cap nut with a hammer to secure the cap nut
on the front/rear axle. Pull on the cap nut to be sure it
is secure.
Hint: You may need the help of another adult to support the
other end of the front/rear axle while you tap the cap nut.
39
.437 Cap Nut
Front/Rear Axle
.437"
.437 Cap Nut
• Insert a #8 x
3
/
4
" screw through the right shock to secure
it to the right fork.
• Tighten the screw with a Phillips screwdriver.
Do not over-tighten.
37
• Fit the other large wheel (with hex bushings) between
the shocks.
38
Large Wheel
(with Hex Bushings)
Left Shock
Right Shock
Right Shock
Small
Hole