Filter
Top Products
11
Assembly
•Turn the monoshock so the bottom fits into the axle guides
inside the frame.
•Lift the moveable top piece of the vehicle frame.
Narrow End
of Monoshock
Rear of
Vehicle Frame
Hole
7
Top View
Monoshock
Axle Guide
Axle Guide
8
Top View
6
Right Side View
Lift
.437 Cap Nut
Lower Shock Rod
Moveable
Top Piece
• Place a .437 cap nut on a flat surface, inside up,
as shown.
Hint: You may want to place a scrap block of wood
underneath the cap nut to protect the assembly surface.
• Fit the lower shock rod into the cap nut.
•Tap the opposite end of the lower shock rod with a
hammer to secure the cap nut on the lower shock rod.
Pull on the cap nut to be sure it is secure.
5
.437"
.437 Cap Nut
Note: The illustration above does not show the moveable
top piece of the vehicle frame.
• Insert the narrow end of the monoshock into the hole in
the top of the frame, as shown.