FITNESS SYSTEMS
RR
H T
O
I
S
2601 Assembly
Page - 48
O W N E R S
M A N U A L
Continued: GENERAL MAINTENANCE INFORMATION
Belt and Cable Tension:
F Referring to the Assembly/Owners Manual, when belts or cables are used check all bolts and attachments to be sure
they are properly attached.
F Check slack in belts or cables and readjust tension if needed.
Seat Sleeves & Oilites:
F Wipe down adjusting tubes with a dust free rag before applying lubricant.
F Lubricate seat sleeves and oilites with a Silicon or Teflon based lubricant spray.
Linear Bearings:
F Referring to the Assembly/ Owners manual carefully dis-assemble the bearing from its housing and place a finger
full of light grease (lithium, super lube, etc.) into the inside of the bearing. Using your finger, press the grease into the
ball-bearings and their tracks. Repeat until the ball-bearing tracks are full of grease. Insert the shaft back into the
bearing and wipe off excess grease.
Anti-Skid Surfaces:
F These surfaces are designed to supply secure footing and need to be replaced if they appear worn or become slippery.
PLEASE KEEP THIS FOR YOUR RECORDS.