Healthrider H450I Treadmill User Manual


 
HOW TO FOLD AND MOVE THE TREADMmLL
HOW TO FOLD THE TREADMmLL FOR STORAGE
Before foJding the treadmill, adjust the incline to the
towest position, mfthis is not done, the treadmill may be per-
manently damaged. Next, unplug the power cord. CAUTmON:
You must be abJe to safely lift 45 pounds (20 kg) to raise,
tower, or move the treadmill.
1, Hold the metaJ frame firmly in the location shown by the
arrow at the right. CAUTmON: To decrease the possibility
of injury, do not lift the frame by the plastic foot rails.
Make sure to bend your Jegs and keep your back straight.
As you raise the frame, make sure to Jilt with your tegs
rather than with your back. Raise the frame about halfway
to the vertical position,
2, Move your right hand to the position shown and hold the
treadmill firmly, Using your left hand, pull the latch knob to
the left and hold it, Raise the frame until the latch pin is
aligned with the hole in the center of the cushion, Slowly re-
lease the latch knob, Make sure that the latch pin is fully
inserted in the hote in the center of the cushion.
To protect the floor or carpet from damage, place a mat
under the treadmill Keep the treadmill out of direct sun-
tight. Do not leave the treadmill in the storage position in
temperatures above 85 ° Fahrenheit.
Latch
-rame
HOW TO MOVE THE TREADMmLL
Before moving the treadmill, convert the treadmill to the storage
position as described above, Make sure that the tatch pin is
fully inserted in the hote in the center of the cushion.
1, Hold the upper ends of the handrails, Place one foot against
one of the wheels,
2, Tilt the treadmill backward until it rolls freely on the front
wheels, Carefully move the treadmill to the desired location,
To reduce the risk of injury, use extreme caution while
moving the treadmill. Do not move the treadmill over an
uneven surface.
3, Place one foot against one of the wheels, and carefully lower
the treadmill until it is resting in the storage position,
Handrail
Wheel
20