Filter
Top Products
5
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two people.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• For help identifying small parts, use the
PART
IDENTIFICA
TION CHART.
The following tools (not included) are required
for assembly:
•Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
• Lubricant, such as grease or petroleum jelly,
and soapy water.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by anyone. However, it is important to
realize that the versatile weight bench has many
parts and that the assembly process will take
time. Most people find that by setting aside plen-
ty of time, assembly will go smoothly.
ASSEMBLY
1.
Attach two Base Feet (27) to the Left Stabilizer
(1) with four M4 x 16mm Screws (57).
Refer to the inset drawing and identify the Front
Support Plates (29) and the Rear Support Plates
(30). Attach two Front Support Plates and two
Rear Support Plates to the Left Stabilizer (1) with
four M8 x 90mm Bolts (48) and four M8 Nylon
Locknuts (64). Do not tighten the Locknuts yet.
2. Attach a Base Foot (27) and a Notched Base
Foot (28) to the Right Stabilizer (2) with four M4 x
16mm Screws (57).
Attach two Front Support Plates (29) and two
Rear Support Plates (30) to the Right Stabilizer
(2) with four M8 x 90mm Bolts (48) and four M8
Nylon Locknuts (64). Do not tighten the
Locknuts yet.
1
2
Before beginning assembly, make sure you
understand the information in the box
above. For help identifying small parts,
use the PART IDENTIFICATION CHART.
27
57
57
28
57
57
57
27
1
27
2
29
29
48
64
64
48
29
29
64
30
30
30
30
64
48
48
29 30