Filter
Top Products
Step 1:
Place Rear Base (1) on the floor.
Cap the Side Bases (2) with 2" x 3" Rect
End Caps (52). Attach the Side Bases (2)
and Triangular Link Plates (27) to both ends
of the Rear Base (1) and secure using 1/2"
x 4-1/4" Hex Head Bolts (73), 1/2" x 1-1/16"
Washers (89) and 1/2" Nylon Nuts (94).
Attach Side Base (2) and Triangular Link
Plates (27) to both sides of the Foot Plate
(17) each using two 1/2" x 4-1/4" Hex Head
Bolts (73), four 1/2" x 1-1/16" Washers (89)
and two 1/2" Nylon Nuts (94).
assembly instructions
-8-
ASSEMBLY