Filter
Top Products
assembly instructions
-13-
Step 6:
Cap the Pec Dec Lower Pulley Block (18)
with 2" End Plug (54). Attach the Pec Dec
Lower Pulley Block (18) to the Pec Dec
Upright (6) using two 1/2" x 3" Hex Head
Bolts (77), four 1/2" x 1-1/16" Washers (89)
and two 1/2" Nylon Nuts (94).
Attach the Back Pad (44) to the Pec Dec
Upright (6) using two 3/8" x 2-3/4" Hex Head
Bolts (83) and two 3/8" x 7/8" Washers (90).
Cap the Leg Presses (20) with 2" x 3 Rect
End Plugs (55). Attach Leg Presses (20) to
Rear Base (1) each using two 1/2" x 3" Hex
Head Bolts (77), four 1/2" x 1-1/16" Washers
(89) and two 1/2" Nylon Nuts (94).
ASSEMBLY