Filter
Top Products
Step 7:
Hook the Lift Bar (11) onto the
Racks (5).
NOTE: The Hinge Plate (29) MUST
face front.
Insert the Guide Rod (9) through
the sleeve on Lift Bar (11), 2"
Rubber Doughnut (63), Right Adj
Height Arm (13) and into the sleeve
on Side Base (2). Then secure with
5/16" x 3/8" Set Screw (85). Hook
Left Adj Height Arm (14) onto Rack
(5). Repeat the same procedure
for left side of Lift Bar (11) and Left
Adj Height Arm (14).
Slide 3" Rubber Doughnut (61) and
Long Olympic Sleeve (36) onto
each end of Lift Bar (11). Secure
Long Olympic Sleeve (36) with
5/16" x 1/2" Set Screw (86). Attach
2" Spring Clip (57) to Long Olympic
Sleeve (36).
ASSEMBLY
assembly instructions
-14-