Filter
Top Products
Step 5:
Attach the Lat Bar Holder (19) to the
Top Cross Frame (7) using two 3/8" x
3" Hex Head Bolts (78), four 3/8" x
7/8" Washers (90) and two 3/8" Nylon
Nuts (96).
Cap Top Cross Frame (7) with 2" x 3"
Rect End Plugs (55). Insert two 1"
Bushing (69) into the holes under the
Top Cross Frame (7).
Slide Top Cross Frame (7) over the
two Guide Rods (9). Align the
mounting holes in the Top Cross Frame
(7) with the holes in the Pec Dec
Upright (6) then secure with two 1/2"
x 3-1/8" Hex Head Bolts (76), four 1/2"
x 1-1/16" Washers (89) and two 1/2"
Nylon Nuts (94). Attach Top Cross
Frame (7) to the Top Connect Beam
(4) using two 1/2" x 4-1/4" Hex Head
Bolts (73), four 1/2" x 1-1/16" Washers
(89) and two 1/2" Nylon Nuts (94).
ASSEMBLY
assembly instructions
-12-