Filter
Top Products
18
34. Attach the Butterfly Cable (73) and a Weight Cap
(67) to the indicated Weight Tube (75) with an
M
10 x 50mm Bolt (106) and an M10 Nylon
Locknut (111).
36. Attach a Pulley (43) inside the Curl Post Upright
(10), over the Low Cable (70), with an M10 x
65mm Bolt (110), two M10 Washers (109), two
1/2" Spacers (68), and an M10 Nylon Locknut
(111).
37. Route the Low Cable (70) through the Right Seat
Upright (11) and the Right Upright (7) and under a
Pulley (43). Attach the Pulley, an M10 Washer
(109), and two Half Finger Guards (46) to the
Right Base (1) with an M10 x 45mm Bolt (95) and
an M10 Nylon Locknut (111).
35. Identify the Low Cable (70). Route the Cable
through the Leg Lever (15) and the Curl Post
Upright (10).
Attach a Pulley (43) to the Leg Lever (15), over
the Low Cable (70), with an M10 x 45mm Bolt
(95) and an M10 Nylon Locknut (111).
7
3
67
111
1
06
75
34
35
70
111
95
43
15
10
70
43
10
68
68
109
109
110
111
36
37
11
70
109
46
95
43
7
1
1
1
1
46