Filter
Top Products
9
4. Orient the Center Upright (9) so the 2” Square
Inner Cap (51) is in the position shown. Attach
t
he Center Upright (9) to the Right and Left Bases
(1, 2) with four M10 x 70mm Bolts (57), four M10
W
ashers (109), and two M10 Nylon Locknuts
(111). Do not tighten the Bolts yet.
5. Attach the Right Upright (7) to the Right Base (1)
with two M10 x 90mm Bolts (102) and two M10
Nylon Locknuts (111). Do not tighten the nylon
Locknuts yet.
9
4
1
2
111
111
57
109
109
57
7
5
1
111
102
51