Filter
Top Products
8
1.
Attach the Foot Plate (90) to the Right Base (1)
with an M10 x 120mm Bolt (97), two M10
Washers (109), and an M10 Nylon Locknut (111).
Do not overtighten the Nylon Locknut; the
Foot Plate must be able to pivot easily.
Insert four M10 x 80mm Carriage Bolts (1
12) up
through the Right Base (1). Place a piece of tape
over the Bolt heads to hold the Bolts in place.
2. Insert two M10 x 80mm Carriage Bolts (112) up
through the Left Base (2). Place a piece of tape
over the Bolt heads to hold the Bolts in place.
3. Attach the Center Base (5) to the Right and Left
Bases (1, 2) with four M10 x 70mm Bolts (57),
four M10 Washers (109), and two M10 Nylon
Locknuts (111).
Do not tighten the Bolts yet.
112
1
90
109
109
97
1
2
112
1
11
112
2
1
2
109
57
3
109
111
5
1
1
1
57
Before beginning assembly, make sure you
understand the information in the box on
t
he previous page. For help identifying
small parts, use the PART IDENTIFICATION
CHART on pages 5 and 6 of this manual.
Frame Assembly