Filter
Top Products
ENG-11ENG-10
ENG
MENU
2. Date/Clock setting
Set the current date and time.
1. Select the date display format.
Select the date display format from “YY/MM/DD”, “MM/DD/
YY”, and “DD/MM/YY” using the M1/+ and M2/- buttons,
and confirm with the SSE button.
Switch the display:
M1/+
M2/-
Confirm:
SSE
2. Enter the “Year”, “Month” and “Day.”
Enter the “Year”, “Month” and “Day” in the display order
selected in Step 1 using the M1/+ and M2/- buttons, and
confirm with the SSE button. Enter the last 2 digits of the year.
Increase/decrease:
M1/+
M2/-
Confirm:
SSE
3. Select the clock display format.
Select “24 hour” or “12 hour” using the M1/+ and M2/- buttons,
and confirm with the SSE button.
24h
↔↔
↔↔
↔ 12h:
M1/+
M2/-
Confirm:
SSE
4. Enter the “Hour” and “Minute.”
Enter the “Hour” using the M1/+ and M2/- buttons, confirm
with the SSE button, and then enter the “Minute” in the
same way.
Increase/decrease:
M1/+
M2/-
Confirm:
SSE
5. After you set the date/clock, press the MENU button to
proceed to the next set up item.
For the formatting operation: To the “Tire circumference input” screen below
For the restarting operation: To the measurement screen and ready for use
(or)
(or)
(Back)
(or)
Display format
Hour Minute
1. Formatting/Restarting operation
Formatting operation
Caution: All data are reset to the default and deleted.
1. While pressing the MENU button on the back of the
computer, press AC button.
Release the MENU button when a test pattern is displayed
on the screen. The date/clock setting screen appears.
Continue with date/clock setting.
Formatting operation:
* When all screen items light up without any test pattern displayed on the screen,
the formatting operation has not been completed properly. Perform the formatting
operation again.
Restarting operation
1. Press the AC button on the back of the computer.
After all screen items light up for a second, the date/clock
setting screen appears.
Continue with date/clock setting.
Restarting operation:
* Most of the settings and file data saved are retained for the restarting operation
(see chart on page 9).
After a test pattern is
displayed, all screen
items light up.
All screen items light
up (for a second).
(At initial purchase, or reset all to default.)
(When you replace batteries, or an error is displayed.)
MENU
AC
AC
(or)
Continue