Filter
Top Products
ENG-19ENG-18
ENG
1
2
5
3
4
6
7
8
LAP
7 98
0
q
w
e
M2/-
M2/-
M2/-
M2/-
M2/-
M2/-
M2/-
M2/-
Pace function
2 types of pace arrow icons for the current speed and the cadence
are displayed on the screen.
These arrow icons indicate whether the current speed (cadence) is
above or below the average speed (average cadence).
: Appears when the current value is above the average.
: Appears when the current value is below the average.
No arrows :
When the current value is equal to the average, or zero.
Lap function
Pressing the LAP button on the measurement screen during measurement records the
data between a given set of points (average lap speed/maximum lap speed, average lap
cadence/maximum lap cadence, lap time/split time, and trip lap distance) up to 99 points.
Immediately after recording, the lap data are displayed in the order as shown below, and
then return to the measurement screen.
Current speed
Cadence
1 Average lap speed
2 Average lap cadence
Displays the average lap speed (average
lap cadence) from the previous point
(for L-01: from the start of measure-
ment).
3 Lap number
Displays the lap number just recorded.
*When the total number of laps exceeds
99 points, “--” appears indicating fur-
ther lap recording cannot be done.
4 Trip lap distance
Displays the trip lap distance from the
previous point (for L-01: from the start
of measurement).
5 Lap time
Displays the elapsed time from the
previous point (for L-01: from the start
of measurement).
6 Maximum lap speed
7 Maximum lap cadence
Displays the maximum lap speed
(maximum lap cadence) from the
previous point (for L-01: from the start
of measurement).
8 Split time
Displays the total elapsed time from the
start of measurement.
Measurement
screen
Measurement
screen
Lap data
2.5 sec. 2.5 sec.
Elapsed time
Displays the elapsed time from the start of measurement to the 1/10 second.
When it exceeds 99:59’59”, it repeats from 00’00”0.
*
When the elapsed time reaches 1 hour, the 1/10 second is not displayed.
Trip distance
Displays the trip distance from the start of measurement.
Countdown distance (page 20)
Displays the countdown distance to the target distance to the tar-
get distance.
7 Lap number (page 19)
Displays the number of current lap.
8 Average lap speed in real time
Displays the average lap speed of the current lap in real time.
9 Lap timer
Displays the elapsed time of the current lap in real time.
Trip lap distance in real time
Displays the trip distance of the current lap in real time.
0 Date
Displays the day, month, and year (last 2 digits).
* Display format is different depending on display set up.
q Clock
Displays the current time of day in the 24- or 12-hour system.
w Total time
The total time is accumulated time since purchase. It can only be
reset with Format (page 10).
e Total distance
The total distance is accumulated distance. It is updated indepen-
dently of starting/stopping measurement.
It can be edited to desired value.
Lower display data
(2 sec.)
Continue