Filter
Top Products
E-35
Converting Data for Transfer to the Watch
Checking the Convert to Watch Data item on the Option menu of a data
mode causes unnecessary spaces inside the data of the mode to be deleted.
Positioning the Watch for Data Communication
The following shows the maximum tolerances when positioning the watch and
computer infrared ports for data communication.
Maximum Distance: approximately 20 cm (7.9 inches)
Maximum Angle: approximately 30 degrees
Data Transfer Troubleshooting
Problems with transferring data between your watch and computer can be due
to the causes listed below. Correct the problem and try again.
Hardware Problems
• Something blocking the path between the infrared ports of the computer
and watch. Remove the blockage.
• Movement of the watch during infrared data transfer. Keep the watch still
during communication.
• More than 20 cm (7.9 inches) between the infrared ports of the computer
and watch. Move the ports closer together.
• Infrared ports of the computer and watch are too close together. Move the
ports farther apart.
• Surrounding light is too bright. This problem often occurs outdoors, near
windows, or near fluorescent or incandescent lighting. Move the infrared
ports closer together.
30 degrees maximum
20 cm (7.9 inches)
maximum
Infrared port
Infrared port