Filter
Top Products
32-33
32 33
The header consisting of the date/time stamp will
be shown. The number of laps in the segment will
appear in the upper left while the segment num-
ber is displayed in the middle left. If the segment
shown is not your desired segment, press [START
• SPLIT] to reach the desired segment. The current
segment will be accessed fi rst, then it will cycle
back to the 1st, then 2nd and so on.
When you have found the segment you want, you
can press [RECALL] button consecutively to read
the lap records from the fi rst to the last lap.
As you continue to press [RECALL] during the dis-
play of the last lap, you can advance to the next
segment by pressing [START • SPLIT]. The front
page of the segment will be shown. Say the next
segment is SEG 1.
How to delete individual memory segments:
Search the desired segment fi rst as described
above. During the display of the segment front
page, press and hold [STOP • RESET] for 2 sec-
Number of laps in
this segment
Segment number
34-35
34 35
onds to activate Delete One function. “DELETE
ONE” will be shown in blinking and beep sound
will be generated.
A “ready” period of 2 seconds will be counted. At
the end of the ready period, all the lap records of
the corresponding segment will be erased, and a
long beep sound will be heard. Then the display
will show the next segment. If you don’t want
to delete the records, you can press any key to
exit from delete ready state before the end of the
ready period. The watch will go back to displaying
the segment front page.
How to delete all memory segments:
Instead of deleting one segment, you can also
delete all memory segments. When you enter the
Data mode, you see the screen “FREE XXX LAP”.
Press and hold the [STOP • RESET] for 3 seconds.
You will hear “Beep, beep, beep” for 3 seconds,
then a long “Beep”. At this point all data in the
memory will be deleted and “DELETE ALL“ will
show on the display.
If you don’t want to delete the records, you can
press any key to exit “DELETE ALL“ state before
the end of the ready period to return to the seg-
ment front page display.
dELETE
ALL
dELETE
OnE