A SERVICE OF

logo

Open as PDF
next previous
Accessories
8-27
The mobile computer’s amber charge LED, located in the Indicator LED Bar (see Figure 1-1 on page 1-
3), shows the status of the battery charging in the mobile computer. See Table 1-1 on page 1-9 for
charging status indications.
The battery usually charges in less than four hours, if the mobile computer is not in use.
Serial/USB Connection
The CAM can connect to and communicate with a serial/USB device, such as a printer or host
computer, through its serial port. See Serial Communication Setup on page 4-9 for the host computer
communication setup procedure.
To connect the CAM to a serial/USB device, connect one end of the serial device cable into the serial
port on the CAM and the other end into the serial/USB port on the device.