Chapter 6: Using guest laptops with your
interactive flat panel
Connecting a guest laptop 49
Using a SMARTGoWire cable 50
Connecting a side laptop 51
Connecting a guest laptop
You can connect a second laptop to the installed USB cable and video cable that is connected to the
back terminal panel of your interactive flat panel. If those cables aren't installed, connect the laptop to
the side terminal panel (see Connecting a side laptop on page 51). For adiagram of the various
computer options, see Connecting computers to your interactive flat panel on page 18.
I MP OR TA N T
The laptop must have SMARTProductDrivers installed. If it doesn’t, you need to connect the
laptop to the interactive flat panel using a SMARTGoWire cable. If you purchased an
SBID8070i-SMP or SBID8070ie-SMP model, you can use the supplied SMARTGoWire cable to
connect your laptop to the interactive flat panel. For more information, see Using aSMARTGoWire
cable on the next page.
g To connect a laptop
1. Place the laptop beside the end of the wire bundle at the guest laptop connection.
2. Connect the installed USB cable to a USB receptacle on the laptop.
3. Connect the VGA cable connector to the laptop.
4. Turn on the laptop.
5. Press the RGB/HV button on the remote control.
OR
Press the Input button on the front control panel until the input source is RGB/HV.
Chapter 6
49
