A SERVICE OF

logo

Using the USB receptacle
You can connect a USB drive or device to the USB receptacle on the side terminal panel on your
interactive flat panel, and then access it from the room computer connected to VGAand USB 1.
N OTE
To disable the USBAreceptacle on the side terminal panel, see Disabling the USB receptacle on
the side terminal panel on page 22.
g To use the USB receptacle
1. Press the VGA button on the remote control.
You can also press the Input button on the front control panel until it is set to VGA.
2. Connect a USB device to the USB receptacle.
3. Use the room computer to access the content on your USB device.
C HA PT ER 5
Usingyour interactiveflatpanel
47