A SERVICE OF

logo

Open as PDF
next previous
EN-12
4. Projector registration
<Note>
• SetthedefaultgatewaysoftheprojectorsandPCcorrectly.Fordetails,contactyournetworkadministrator.
• BesuretomakeanoteoftheIPaddressesanddefaultgatewaysyouset.Ifyouforgetthesettingvalues,you
may not be able to detect the projectors again.
• Atinitialsetup,DHCPorAutoIP(169.254.0.1through169.254.255.254)automaticallyassignsanIPaddress.
Note that a different IP address may be assigned every time you start the projectors. If a connection cannot
beestablished,execute"SearchProjector".
• IfyouchangetheIPaddressintheprojectormenuaftertheprojectorshavebeendetected,execute“Search
Projector” again.
• ItisrecommendedthatyouassignanIPaddressoftheprojectortothexedIPaddress.
4.3. When changing the projector IP settings
YoucanchangetheprojectorIPsettings.
(1) Select the projector which you like to change from the projector list on the main screen.
(2) Select "Assign IP" from “Configuration” of the menu bar on the main screen.
• “AssignIP”windowisdisplayed.
(3) To automatically assign an IP address, select [Auto] and then select DHCP. To manually
assign an IP address, select [Manual] and enter values for IP Address, Subnet Mask, and
Default Gateway.
Item Description
DHCP Obtain an IP address via a DHCP server.
IP Address Enter an IP address.
Subnet Mask Enter the subnet mask.
Default Gateway Enter the default gateway address.
<Note>
• AnerrordialogfortheftdetectionmaybedisplayedaftertheIPsettingshavebeenchanged.
• IfaconnectioncannotbeestablishedaftertheIPsettingshavebeenchanged,execute“SearchProjector”.
• IfyouwanttochangetheIPaddressofaprojectorconnectedviaarouter,youneedtospecifyasearchrange
of IP addresses that includes the new IP address in “Search Projector Setting”.
• Consultyournetworkadministratoraboutthesubnetmaskanddefaultgatewayinadvance.