shaft with pliers, insert a
While holding the valve
shaft with pliers, insert a
While holding the valve
shaft with pliers, insert a
shaft with pliers, insert a
into the shaft and, while
The amount of air that enters
a burner is controlled by the
Each grill burner is tested and
adjusted at the factory prior to
Each grill burner is tested and
adjusted at the factory prior to
Each grill burner is tested and
adjusted at the factory prior to
adjusted at the factory prior to
adjusted at the factory prior to
adjusted at the factory prior to
tions in gas pressure, gas con
version and even in the quality
tions in gas pressure, gas con
version and even in the quality
tions in gas pressure, gas con
of the gas itself may make it
version and even in the quality
of the gas itself may make it
version and even in the quality
necessary to adjust the burner.
burners should be visually
stable with slight yellow tips.
stable with slight yellow tips.
stable with slight yellow tips.
ting burner adjustment.ting burner adjustment.ting burner adjustment.
ting burner adjustment.ting burner adjustment.ting burner adjustment.
from the burner.
those indicated in the photo,
those indicated in the photo,
ensure that the air shutter and
ensure that the air shutter and
those indicated in the photo,
ensure that the air shutter and
those indicated in the photo,
those indicated in the photo,
ensure that the air shutter and
those indicated in the photo,
burner ports are free and clear
burner ports are free and clear
of dirt, debris, or spider webs.
of dirt, debris, or spider webs.
burner ports are free and clear
of dirt, debris, or spider webs.
burner ports are free and clear
burner ports are free and clear
of dirt, debris, or spider webs.
burner ports are free and clear
If clear, then adjust the air
If clear, then adjust the air
of dirt, debris, or spider webs.
If clear, then adjust the air
of dirt, debris, or spider webs.
of dirt, debris, or spider webs.
If clear, then adjust the air
of dirt, debris, or spider webs.
It is locked in place by a screw
It is locked in place by a screw
It is locked in place by a screw
which must be loosened
It is locked in place by a screw
It is locked in place by a screw
which must be loosened
It is locked in place by a screw
adjusted retighten the screw.
adjusted retighten the screw.
Lift out the burner, loosen
the set screw and then put
the set screw and then put
the burner back in place
the set screw and then put
the burner back in place
and light it.
the burner back in place
yellow, indicating insuf
yellow, indicating insuf
yellow, indicating insuf
the air shutter counterthe air shutter counter
clockwise to allow more air
Be extremely careful Be extremely careful Be extremely careful
around hot around hot around hot
and other grill parts.and other grill parts.and other grill parts.
like a torch) and tends to
lift away from the burner,
air, turn the air shutter
the air shutter set screw
and reinstall the burner,
briquette trays and grill
briquette trays and grill
racks.
briquette trays and grill
inally, before leaving, check
all the burners for proper
inally, before leaving, check
all the burners for proper
inally, before leaving, check
all the burners for proper
ake sure the
all the burners for proper
control knobs turn freely and
operation.
control knobs turn freely and
operation.
completely through their full
control knobs turn freely and
completely through their full
control knobs turn freely and
where the main gas supply
shut off valve is located.
where the main gas supply
shut off valve is located.
where the main gas supply
inally, for safety and for
must leave this manual with
advise them to keep it for
ake sure you
advise them to keep it for
ake sure you
or technical assistance call:
