valve is fully closed. It is
valve is fully closed. It is
possible for the valve to be
valve is fully closed. It is
possible for the valve to be
valve is fully closed. It is
open without releasing gas
possible for the valve to be
open without releasing gas
possible for the valve to be
but, as soon as you start con
open without releasing gas
but, as soon as you start con
open without releasing gas
necting the regulator, gas will
leak from the connection.
necting the regulator, gas will
leak from the connection.
necting the regulator, gas will
Insert the regulator inlet into
the cylinder valve and turn the
black coupler clockwise until
the coupler is hand tight.
black coupler clockwise until
the coupler is hand tight.
black coupler clockwise until
the coupler is hand tight.
the coupler is hand tight.
make sure the main cylinder
make sure the main cylinder
make sure the main cylinder
make sure the main cylinder
the coupler and turn counter
the coupler and turn counter
clockwise. The inlet will then
the coupler and turn counter
clockwise. The inlet will then
the coupler and turn counter
You should purge the gas line
of air before attempting to
You should purge the gas line
of air before attempting to
You should purge the gas line
of air before attempting to
light the grill.
of air before attempting to
ake sure all grill controls
is glowing. It is furthest
is glowing. It is furthest
is glowing. It is furthest
from the fuel source and
is glowing. It is furthest
will completely purge the
lines. It will take several
will completely purge the
lines. It will take several
will completely purge the
seconds for the burner to
purge and the burner to
light
purge and the burner to
control before attempting
after shutting off the
control before attempting
after shutting off the
control before attempting
to light the burners.
control before attempting
reate a soapy solution
of 1 part soap and
reate a soapy solution
reate a soapy solution
3
reate a soapy solution
Turn on the fuel supply. T
natural gas, turn the valve
urn on the fuel supply.
natural gas, turn the valve
urn on the fuel supply.
clockwise one full rotation.
generously by paint brush
Apply the soap solution
generously by paint brush
Apply the soap solution
or squirt bottle on all con
generously by paint brush
or squirt bottle on all con
generously by paint brush
or squirt bottle on all con
or squirt bottle on all con
If bubbles appear to
If bubbles appear to
nections, you have a gas
IATELY turn off
nections, you have a gas
Turn all grill controls to the
up, then turn the controls
up, then turn the controls
up, then turn the controls
up, then turn the controls
up, then turn the controls
To prevent re or explosion To prevent re or explosion To prevent re or explosion
hazard, DO NOT smoke or hazard, DO NOT smoke or hazard, DO NOT smoke or
To prevent re or explosion
hazard, DO NOT smoke or
To prevent re or explosion To prevent re or explosion To prevent re or explosion
hazard, DO NOT smoke or
To prevent re or explosion
hazard, DO NOT smoke or
To prevent re or explosion
hazard, DO NOT smoke or
To prevent re or explosion To prevent re or explosion To prevent re or explosion
hazard, DO NOT smoke or
To prevent re or explosion
allow any potential source allow any potential source allow any potential source
of ignition (sparks, electriof ignition (sparks, electriof ignition (sparks, electri
allow any potential source
of ignition (sparks, electri
allow any potential source allow any potential source allow any potential source
of ignition (sparks, electri
allow any potential source
of ignition (sparks, electri
allow any potential source
of ignition (sparks, electri
allow any potential source allow any potential source allow any potential source
of ignition (sparks, electri
allow any potential source
cal arcing, etc) in the area cal arcing, etc) in the area cal arcing, etc) in the area
of ignition (sparks, electri
cal arcing, etc) in the area
of ignition (sparks, electriof ignition (sparks, electriof ignition (sparks, electri
cal arcing, etc) in the area
of ignition (sparks, electri
cal arcing, etc) in the area
of ignition (sparks, electri
cal arcing, etc) in the area
of ignition (sparks, electriof ignition (sparks, electriof ignition (sparks, electri
cal arcing, etc) in the area
of ignition (sparks, electri
while performing a leak while performing a leak while performing a leak
cal arcing, etc) in the area
while performing a leak
cal arcing, etc) in the area cal arcing, etc) in the area cal arcing, etc) in the area
while performing a leak
cal arcing, etc) in the area
while performing a leak
cal arcing, etc) in the area
while performing a leak
cal arcing, etc) in the area cal arcing, etc) in the area cal arcing, etc) in the area
while performing a leak
cal arcing, etc) in the area
test. Leak tests should be test. Leak tests should be test. Leak tests should be
while performing a leak
test. Leak tests should be
while performing a leak while performing a leak while performing a leak
test. Leak tests should be
while performing a leak
test. Leak tests should be
while performing a leak
test. Leak tests should be
while performing a leak while performing a leak while performing a leak
test. Leak tests should be
while performing a leak
conducted outdoors only. conducted outdoors only. conducted outdoors only.
Never conduct a leak test Never conduct a leak test Never conduct a leak test
using re or ame.using re or ame.using re or ame.
Wash off the soapy solution
Wash off the soapy solution
with cold water and dry.
Wash off the soapy solution
Tighten the loose joint, or
replace the faulty part with
Tighten the loose joint, or
replace the faulty part with
Tighten the loose joint, or
replace the faulty part with
replace the faulty part with
damaged. The only way to
safely resolve a damaged
damaged. The only way to
Repeat the leak test to
ensure that no leaks are
Repeat the leak test to
he main brass burners and
side burners on your Lynx
grill feature an adjustable low
side burners on your Lynx
grill feature an adjustable low
side burners on your Lynx
luctuations in gas pressure,
gas conversion and even in
luctuations in gas pressure,
gas conversion and even in
luctuations in gas pressure,
the quality of the gas itself
gas conversion and even in
the quality of the gas itself
gas conversion and even in
the quality of the gas itself
may affect burner perfor
the quality of the gas itself
may affect burner performay affect burner perfor
may affect burner perfor
may affect burner perfor
may affect burner perfor
may affect burner perfor
It could be either too high or
To adjust the burner low T
o adjust the burner low
setting:
o adjust the burner low
ake sure the grill is cool.
briquette trays so that you
briquette trays so that you
briquette trays so that you
