Your Lynx grill uses an electric
ignition system that does not
spark. The igniters should
spark. The igniters should
glow constantly when a
spark. The igniters should
control knob is pushed in.
control knob is pushed in.
control knob is pushed in.
getting electricity by turning
push in and hold the
corresponding control
push in and hold the
knob. You will need either
corresponding control
knob. You will need either
corresponding control
(Be sure you push in the
correct control knob and
(Be sure you push in the
keep the knob in the
keep the knob in the
keep the knob in the
keep the knob in the
igniters. If igniters don’t
heck the remaining
igniters. If igniters don’t
heck the remaining
glow, proceed with trou
glow, proceed with trou
If the igniters are working
If the igniters are working
check to see if gas is
If the igniters are working
reaching the burners by at
tempting to match light a
tempting to match light a
burner.
tempting to match light a
If match lighting doesn’t
If match lighting doesn’t
If match lighting doesn’t
tions for leaks and ensure
tions for leaks and ensure
the supply is of the correct
the supply is of the correct
the supply is of the correct
type and is of adequate
the supply is of the correct
the supply is of the correct
type and is of adequate
the supply is of the correct
If the burner will light with a
match, then the igniter may
not be functioning correctly.
match, then the igniter may
not be functioning correctly.
match, then the igniter may
not be functioning correctly.
all for service.
not be functioning correctly.
If the burner will not match
light, and you know you are
getting gas, wait for any
light, and you know you are
getting gas, wait for any
light, and you know you are
gas to dissipate and remove
the burner and check it for
gas to dissipate and remove
the burner and check it for
gas to dissipate and remove
Is there fuel supplied to the grill?
connection tight?
ave you opened the valve on the propane cylinder?
Is the grill plugged in to a live electric circuit?
