irst determine if the problem
is being caused by location.
irst determine if the problem
is being caused by location.
irst determine if the problem
If the grill is subject to high
is being caused by location.
If the grill is subject to high
is being caused by location.
winds, reposition it to provide
heck the gas supply and
heck the gas supply and
burners are correctly posi
burners are correctly posi
tioned in the grill.
burners are correctly posi
tioned in the grill.
tioned in the grill.
The valves on the grill feature
an adjustable low setting.
luctuations in gas pressure,
gas conversion and even in
luctuations in gas pressure,
gas conversion and even in
luctuations in gas pressure,
the quality of the gas itself
gas conversion and even in
the quality of the gas itself
gas conversion and even in
the quality of the gas itself
may affect burner perfor
the quality of the gas itself
may affect burner performay affect burner perfor
may affect burner perfor
may affect burner perfor
may affect burner perfor
may affect burner perfor
It could be either too high or
ollow the same procedure as
described for the grill burners
ollow the same procedure as
described for the grill burners
ollow the same procedure as
to diagnose problems with the
to diagnose problems with the
rotisserie burner.
to diagnose problems with the
see in bright sunny conditions.
after ignition for the rotis
serie burner to stay lit.
If the burner will not stay lit
when you release the control
control knob in for at least
control knob in for at least
If, after holding the control
If, after holding the control
If, after holding the control
seconds, the burner still will
not stay lit when releasing
the control knob, call for
not stay lit when releasing
the control knob, call for
not stay lit when releasing
power source and check for
rotisserie motor operation.
isconnect power from the
isconnect power from the
the transformer to cool down
the transformer to cool down
and reset. Then reconnect
power. If, after resetting the
transformer and replacing
power. If, after resetting the
transformer and replacing
power. If, after resetting the
bulbs, you still do not have
transformer and replacing
bulbs, you still do not have
transformer and replacing
bulbs, you still do not have
power, call for service.
bulbs, you still do not have
Replacement bulbs are
Replacement bulbs are
type with a
type with a
The glass cover is held in
place by two spring tension
tabs. You may have to loosen
place by two spring tension
tabs. You may have to loosen
place by two spring tension
the screw to remove the lens.
Avoid touching the glass of a
very sensitive to the oils found
alogen bulbs are
very sensitive to the oils found
alogen bulbs are
in human skin. Touching the
bulbs may shorten their life.
in human skin. Touching the
bulbs may shorten their life.
in human skin. Touching the
the socket without twisting.
all other grills have two light
all other grills have two light
all other grills have two light
old the bulb using a paper
old the bulb using a paper
towel or other cloth and
old the bulb using a paper
gently press it straight into the
socket. The glass cover should
gently press it straight into the
socket. The glass cover should
gently press it straight into the
be gently snapped back into
be gently snapped back into
place.
be gently snapped back into
bulbs may shorten their life.
the socket without twisting.
PULL ON
SPRING
TABS TO
RELEASE
LIGHT
COVER
PULL ON
SPRING
TABS TO
RELEASE
LIGHT
COVER
