Press forward on the base of the test
strip holder to be sure it is properly
in place.
You are now ready to do a check strip
test. If the check strip will not slide
into the test strip holder, repeat Step 4.
Replacing the Batteries
The ONE TOUCH
®
Profile
®
Meter
comes with batteries already
installed. When the batteries need to
be replaced, use two AAA, 1.5 volt,
alkaline batteries.
The batteries should last about one
year when testing up to four times
a day. When the battery symbol
appears on the meter display, the
batteries are getting low. The meter
will still provide accurate test results
with low batteries, but you should
replace them as soon as possible.
89
METER CARE
CM
LSC-96-003 own. manual 7/26/97 1:45 AM Page 89
