A SERVICE OF

logo

Open as PDF
next previous
Step 3: When insert side 2
A strip Appears, Turn the Check
Strip Over and Slide it Back into
the Test Strip Holder.
It should go in notched end first, Side
2 (white side) facing up. The meter
counts down from four to zero and
then gives you a check strip result.
The display will show A ok if your
result falls within the correct check
strip range printed on the back of
your meter. If the reading is not with-
in the recommended range, the meter
display will show A notok redo A.
M C
2
BEFORE TESTING
(Example)
17
LSC-96-003 own. manual 7/26/97 1:45 AM Page 17