A SERVICE OF

logo

37
TESTING
Be sure that you:
Touch only the
tip of the drop
of blood to the
test spot.
Apply enough
blood to form
a round, shiny
drop that covers
the test spot
completely and stays wet during
the entire test.
Do not smear blood on the test
spot or apply a second drop after
the test begins.
Do not move the test strip as you
are applying blood. If the test
strip moves, push it back into its
original position.
Do not remove the test strip from
the meter to apply blood.
If the beep option is set to “on,” the
meter will beep when the blood is
applied to the test spot.
Step 3:
Accurate Results
in 45 Seconds.
The meter then
counts down from
45 to 0 seconds,
beeps, and dis-
plays your result.
CM
CM
(Example)
LSC-96-003 own. manual 7/26/97 1:45 AM Page 37