75
MESSAGES
apply The meter is ready to receive a blood or control solution sample. If
sample performing a check strip test, this is your signal to remove the check strip
from the meter.
45. . . . . . . 0 The meter is counting down from 45 seconds to 0.
106 mg/dl A blood test has been completed. This indicates a blood glucose result
(Example)
when the meter is set for mg/dL, the unit of measure used in the
8:01am 6-01-95 United States.
5.9 mmol/l A blood test has been completed. This indicates a blood glucose result
(Example)
when the meter is set for mmol/L, the unit of measure used in Canada
8:01am 6-01-95 and parts of Europe.
5.6 mmol/l A control solution test has been completed. (If you have just performed
(Example)
a blood glucose test, this means that the blood sample was too small and
contrl the meter read it as control solution. Repeat the test with a new test strip and
7:52am 6-01-95 larger drop of blood.)
insert You are performing a check strip test. Turn the check strip over and insert
side 2 Side 2.
MESSAGE APPEARS WHEN
LSC-96-003 own. manual 7/26/97 1:45 AM Page 75
