If these messages appear, repeat the
check strip test. If these messages
appear again, clean your meter and
repeat the test. If you do not obtain an
acceptable check strip reading, redoA
will appear each time you turn on your
meter, indicating that your last check
strip test was outside of the check strip
range. This message will continue to
appear until you perform a check strip
test and get a reading that falls within
the correct check strip range.
CAUTION: If your check strip test
result is out of range, your meter may
not be working properly. Do not use
the meter to test your blood until you
get a check strip reading that is with-
in the correct range. For assistance,
call the LifeScan Customer Care Line
at 1 800 663-5521.
To clean and maintain the check
strip:
■
Make sure both sides of the check
strip are clean. If necessary, wipe
the check strip with a soft cloth or
tissue dampened with water. Dry it
completely.
BEFORE TESTING
(Example)
18
LSC-96-003 own. manual 7/26/97 1:45 AM Page 18
