bizhub C652/C652DS/C552/C452 5-7
5.1 Mac OS X 10.2/10.3/10.4/10.5
5
8 Click [Add].
When the selected printer is registered in the "Print & Fax", the setting procedure is completed.
% If the "Installable Options" window appears, proceed to change the option settings as necessary.
For details, refer to page 9-5.
Reference
- For OS X 10.4, you can also add a printer by clicking [Add] in the "Printer Setup Utility" window.
Configuring the IPP settings
TCP/IP setting for the machine
Specify the IP address for the machine.
IPP setting for the machine
In "IPP Setting" for the machine, enable IPP printing.
d Reference
For details on specifying the IP address for the machine, refer to the "User's Guide [Network Administrator]".
For details on the IPP settings for the machine, refer to the "User's Guide [Network Administrator]".
Configuring the TCP/IP settings for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1 In the "Apple" menu, select "System Preferences".
2 Click the [Network] icon.
3 The Ethernet setting window appears.
% For OS X 10.5, select "Ethernet", and then click [Advanced].
% For OS X 10.4, select "Built-in Ethernet", and then click [Configure].
4 Click the "TCP/IP" tab.
5 Configure the settings including the IP address and subnet mask according to the settings of the
network to which the Macintosh computer is connected.
6 Click the close button at the top left corner of the window.
% When the "This service has unsaved changes" message appears, click [Apply].
Adding a printer
1 In the "Apple" menu, select "System Preferences".
2 Click the [Print & Fax] icon.
3 Click [+] on the "Print & Fax" window.
"Printer Browser" appears.
4 Click [IP] or [IP Printer].
5 In "Protocol", select "IPP".
6 In "Address", enter the IP address for the machine. In "Queue", enter "ipp".
The printer driver corresponding to this machine being identified with its IP address is automatically
selected.
% After the printer driver is selected, go to Step 8.
% If an incorrect printer driver is selected, go to Step 7.
