bizhub C652/C652DS/C552/C452 11-5
11.1 Proof Print
11
2 While [Current Jobs] is displayed, press [Release Held Job].
The Release Held Jobs screen appears.
3 From the job list, select the job you want to print.
% To print the remaining number of copies, continue with Step 6.
% To change the printing conditions, continue with Step 4.
% If the job you want to release is not displayed, press [ ] or [ ] until the desired job is displayed.
If an incorrect job was selected, touch the button for the selected job again to deselect it.
4 Press [Change Settings].
The Change Settings screen appears.
% To check the results of setting changes, select the job whose sample copy is to be printed from the
job list, and then press the [Proof Copy] key on the control panel.
One copy is printed for checking.
After performing the [Proof Copy] key, the original settings are restored. Configure the settings again
as necessary.
5 Change the printing conditions in the Change Settings screen, and then press [OK].
The Release Held Jobs screen appears again.
% To cancel releasing the held job, press [Cancel].
6 Press [OK] or the [Start] key in the control panel.
The stored job is changed to an active job, and then printed.
