Honeywell 4800dr Manual

A SERVICE OF

next previous

6 - 8

Code 93

< Default All Code 93 Settings >

Code 93

Code 93 Message Length

Scan the barcodes below to change the message length. Refer to Message Length Description (page 6-

2) for additional information. Minimum and Maximum lengths = 0-80. Minimum Default = 0, Maximum

Default = 80.

Code 93 Code Page

Code pages define the mapping of character codes to characters. If the data received does not display

with the proper characters, it may be because the barcode being scanned was created using a code

page that is different from the one the host program is expecting. If this is the case, scan the barcode

below, select the code page with which the barcodes were created (see Code Page Mapping of Printed

Barcodes on page A-4), and scan the value and the Save barcode from the Programming Chart on the

inside the back cover of this manual. The data characters should then appear properly.

* On

Off

Minimum Message Length

Maximum Message Length

Code 93 Code Page