Honeywell 4800dr Manual

A SERVICE OF

next previous

6 - 4

Code 39

< Default All Code 39 Settings >

Code 39

Code 39 Start/Stop Characters

Start/Stop characters identify the leading and trailing ends of the barcode. You may either transmit, or

not transmit Start/Stop characters.

Default =

Don’t Transmit.

Code 39 Check Character

No Check Character indicates that the document reader reads and transmits barcode data with or with-

out a check character.

When Check Character is set to Validate, but Don’t Transmit, the unit only reads Code 39 barcodes

printed with a check character, but will not transmit the check character with the scanned data.

When Check Character is set to Validate and Transmit, the document reader only reads Code 39 bar-

codes printed with a check character, and will transmit this character at the end of the scanned data.

Default = No Check Character.

* On

Off

Transmit

* Don’t Transmit

Validate, but Don’t Transmit

* No Check Character

Validate and Transmit