42
Images are too dark (underexposed) or too bright
(overexposed).
◗ Make sure the flash is not set to (flash off).
◗ If you are using the flash, make sure you are within
range (between 2.3 and 8.5 feet for automatic
mode). See the Camera User’s Guide on your
computer for more information.
◗ If you are shooting a close-up in macro mode, try the
(flash off) setting.
◗ If you are using manual mode, you can adjust the
exposure compensation or light sensitivity settings.
See the Camera User’s Guide for instructions.
Miscellaneous Problems
The color is incorrect or lines appear on the printed
picture.
◗ Make sure you load 4 × 6-inch Epson Premium
Glossy Photo Paper in your printer.
◗ You may need to run one of the printer maintenance
programs. If you are using the Epson Stylus Photo
R200, see the Camera User’s Guide on your
computer. For other printers, see the instructions
that came with the printer.
L-410Basics.book Page 42 Tuesday, June 22, 2004 4:22 PM
