41
Nothing appears on the LCD screen.
◗ The screen may have shut off automatically to save
power. Press any button or turn the Mode dial.
◗ Press the
DISP button to change the LCD screen
setting.
◗ When the camera is connected to a printer or
computer, the LCD screen is disabled.
Image Problems
Images are out of focus.
◗ Make sure you place your subject in the center of the
focus frame and press the shutter button halfway.
You can then reframe your picture before you press
the button all the way down.
◗ Make sure you are at least 20 inches away from your
subject (or 4.3 inches in Macro mode).
◗ Make sure the lens is clean. If not, blow off any loose
dust, then breathe on the lens and wipe it with a
soft, dry cloth.
◗ If the captured image is blurred, you may have
moved the camera. Hold the camera in the proper
position when shooting, with your arm close to your
body. Use a tripod for night scenes and other low
light situations.
L-410Basics.book Page 41 Tuesday, June 22, 2004 4:22 PM
