19
3 Center your subject in the middle of the square
focus frame on the screen.
The default flash setting is automatic, indicated by
the
icon on the LCD screen. The flash will go off
automatically whenever necessary.
If you want to change the flash setting, press the
r
button. See page 22 for a list of flash settings.
4 Press and hold the shutter button halfway. The focus
frame turns green and the focus is set. If you want to
reframe your picture, move the camera until the
photo you want appears on the screen.
5 Press the shutter button all the way down. The
camera beeps as it captures the image.
Note:
The LCD screen may turn off to save battery power after
you take a picture. Press any button or turn the Mode dial to
turn the screen back on.
Taking Photos in Manual Mode
If you are an advanced photographer, you may want to
use manual mode. This allows you to select the quality
(resolution), white balance, light sensitivity, and
exposure compensation. You can also select special scene
modes for portraits or landscape photos, or turn the
LCD screen off to save battery power.
L-410Basics.book Page 19 Tuesday, June 22, 2004 4:22 PM
