32
You can also run maintenance programs for the Epson
Stylus Photo R200 printer directly from the camera. For
instructions, see the Camera User’s Guide on your
computer. See page 14 for instructions on installing the
guide and software.
Note:
Future products may be added to the list of supported
printers. Check the Epson web site at www.epson.com for
more information.
Connecting the Camera to Your Printer
Make sure the camera is turned off before you begin.
You can conserve battery power by using the optional
AC adapter when you print from the camera. See the
Camera User’s Guide on your computer for instructions.
1 Locate the correct cable for your printer, as shown
on page 31.
2 Connect the large end of the cable to the correct
port on your printer.
L-410Basics.book Page 32 Tuesday, June 22, 2004 4:22 PM
