40
The camera does not react when you press the buttons.
◗ If the lights on the back of the camera are flashing,
try turning the camera off and then on again.
◗ If the power does not turn off, remove the battery,
reinstall it, and turn the power on. If the lights are
still flashing, contact Epson as described on page 45.
The camera takes too long to take a photo.
If you press the shutter button all the way down, the
camera has to focus and set the exposure before the
shutter releases. Press and hold the button halfway to set
the focus, then press it all the way down to take a photo.
The flash doesn’t work.
◗ Make sure the flash is not set to (flash off).
◗ If you’re using one of the automatic flash modes, the
flash only works when there is insufficient light.
The LCD screen is hard to see.
Turn the Mode dial to
SETUP and adjust the LCD
Brightness
setting.
L-410Basics.book Page 40 Tuesday, June 22, 2004 4:22 PM
