18
Taking Photos in Automatic Mode
The automatic photography mode lets you capture high-
resolution images without making any complicated
settings. You can use the zoom buttons to move in closer
to your subject and/or set the flash for indoor or low-
light photographs.
In automatic mode, images are captured at a resolution
of
N2304 (2304 × 1728 pixels). If you want to change
this setting, use manual mode as described on page 19.
Note:
You can also use the macro and/or self-timer features
in automatic mode. For instructions, see the Camera User’s
Guide on your computer. See page 14 for instructions on
installing the Camera User’s Guide and software.
Before you start, make sure the batteries are installed
and the camera is turned on as described on pages 10
and 11.
1 Turn the Mode dial to automatic.
2 Make sure you are at least 20 inches (50 cm) away
from your subject.
◗ To zoom in on your subject, press the
T
(telephoto) button.
◗ To zoom out, press the
W (wide-angle)
button.
L-410Basics.book Page 18 Tuesday, June 22, 2004 4:22 PM
