-12-
1 Remove 3 screws C (T3x10) to take the Filter Board
Ass’y upward.
2 Remove 3 screws D (T3x8) and 1 screw E (T3x6) to
take the Filter Board from the Holder.
3 Remove 2 screws F (T3x10) to take the Interlock switch
(SW902) from the cabinet bottom.
1 Remove 1 screw A (T3x20) then take the Fan (FN906) off
and remove 3 screws B (T3x10) to take the Duct-A off.
2 Remove 4 screws C (T3x10) to take the Duct-B off.
3 Remove 3 screws D (T3x10) to take the Duct-C off,
remove 1 screw E (T3x8) and take the Sensor Board off.
4 Remove 2 screws G (T4x25) to take the Fan (FN902) off.
Remove 2 screws H (T4x25) to take the Fan (FN901) off.
5 Remove 2 screws J (T3x8) to take the Duct Cover off and
remove 2 screws
K (T4x25) to take the Fan (FN903) off.
6 Remove 5 screws L (T3x10) to take the Duct-D off.
Fig.9
Fans (FN901, FN902) removal
12
Line Filter Board & Interlock SW removal
11
Mechanical Disassemblies
1 Remove 4 screws A ( T3x6) to take the Power Board off.
2 Remove 4 screws B (T3x10) to take the Holder from the
cabinet bottom.
Fig.8
Power AC Board removal
10
Power AC
Board
Power Board
Holder
B
C
A
A
BB
A
Interlock Switch
(SW902)
Filter Board
A
C
E
D
D
D
F
F
C
Duct-C
Duct-A
Duct-D
Duct-B
Duct
Cover
Sensor
Board
