Installing In-Sight™ 4000 Series Vision Sensors
7
2 Installing the In-Sight 4000
In this section…
2.1 Connecting the In-Sight 4000.................................................................................7
2.2 Installing In-Sight PC Host Software ....................................................................13
2.3 Adding the In-Sight 4000 to a Network ................................................................14
2.4 Logging On to the In-Sight 4000 ..........................................................................19
2.5 Changing In-Sight 4000 Network Settings ...........................................................20
2.1 Connecting the In-Sight 4000
The In-Sight 4000 has two RJ-45 connector ports opposite the lens mount on a
4000/4001 or the remote head connector on the 4100 processor, as shown in
Figure 2-1: the network port (left, labeled ENET) and the breakout port (right, labeled
24VDC). The network port provides the Ethernet connection for network
communications. The breakout port supplies connections for power, I/O, and serial
communications.
Figure 2-1: In-Sight 4000 Network and Breakout Ports
2.1.1 Connecting the Network Cable
If you are connecting to an Ethernet switch:
1 Plug one of the RJ-45 connectors on a CAT5 straight-pinned cable into the ENET
port.
2 Plug the other end of the CAT5 straight-pinned cable into an available port on the
switch.
