Cognex 4000 Manual

A SERVICE OF

next previous

Installing In-Sight™ 4000 Series Vision Sensors Section 1 - Introduction

3

1.3.1 Standalone In-Sight Network Configurations

The simplest In-Sight 4000 networks are shown in Figure 1-1 and Figure 1-2. In these

basic configurations, a CAT5 cable with crossover coupler (P/N 185-0080) directly

connects a single In-Sight 4000 to a standalone In-Sight PC Host equipped with a

network card, or to an In-Sight 3000 processor. Neither the In-Sight PC Host nor the

In-Sight 3000 is connected to the larger, factory-floor network.

Figure 1-1: In-Sight 4000 – In-Sight PC Host Network

Figure 1-2: In-Sight 4000 – In-Sight 3000 Network